Classic Hanging Air Chair

INDOOR HANGING INSTRUCTIONS Instructions for Hanging the Chair Indoors

1. Locate a Ceiling Joist by tapping or using a stud finder. The beam must be a solid straight-grained structural joist, usually found every 16" to 18" from each other.
2. Vertically drill a 5/16" pilot hold in the middle of the joist for the screw to go into.
3. We recommend that you rotate the screweye in all the way to the eye for best support.
4. Tie the two free ends of the chair ropes onto the large S-hook by using an overhand knot.
5. Hang the S-hook onto the screweye and determine the rope length that suites your ceiling height.
6. The assembled chair should hang approximately 12" to 14" inches from the floor, based on your personal preference.
7. You may need to do some adjustments to the rope until you find the right sitting height to accommodate your own height.
8. Insert the dowels deeply into the boot cups.
9. Get a good book or crossword puzzle and get ready to Relax!

1. Tie a separate loop of rope over the tree limb, and drop it down to a height one can reach from the ground.
2. Follow the hanging instructions from the instructions for Hanging the Chair indoors beginning at Step 3.
3. Once the chair is assembled, hook the large S-hook onto the rope loop of the chair.
4. Some adjustments may need to be made until you find the perfect height for your desired relaxation.
5. You may consider purchasing a Tree Strap & Carabiner Clamp for quick hook up and release.
   
   NOTE: The spreader bar width is 44.5 inches